Page 1 of 1

nomex gasket

PostPosted: 29 Aug 2013, 17:30
by highonthehog
Can anyone tell me where in the uk I can get nomex gasket for the door on my offset smoker
Thanks Neil

Re: nomex gasket

PostPosted: 31 Aug 2013, 07:23
by KamadoSimon
I've seen them for sale on eBay in the uk a fair bit.

Re: nomex gasket

PostPosted: 31 Aug 2013, 08:27
by keith157
Have you tried the manufacturers they may have a distributor in the UK/Europe?

Re: nomex gasket

PostPosted: 31 Aug 2013, 09:22
by paulandabbi2013
highonthehog wrote:Can anyone tell me where in the uk I can get nomex gasket for the door on my offset smoker
Thanks Neil


This is another idea if you are struggling to find a actual gasket for your offset.....

"Another option is Rutland High Temp Silicone Sealant or use a high temp auto silicone that is rated for 500°F or more. You can make a really thin bead around the door rim or the smoker body where the door contacts it. Lay a thin strip of kitchen wax paper or kitchen parchment paper (which is actually silicon impregnated) on top of the bead. Gently close the doors until the goo spreads out and the paper makes contact with the opposite surface all around. Lift the door and let it set. Peel off the paper. The sealant can be trimmed with a knife. Rutland Products are in hardware stores, furnace and wood stove stores, and online."

I have an offset too but my top opens fully rather than having a door so I am using a rubber seal that is used on wood burning stoves as I have about 7mm gaps either side :)

Good luck with finding it!

Re: nomex gasket

PostPosted: 31 Aug 2013, 12:11
by gazz_46
Got mine from the link below, comes on a roll with adhesive and is easy to fit with loads left over. If they don't list your smoker just get one similar or a basic roll.

Very fast delivery

http://www.bbqgaskets.com/

Re: nomex gasket

PostPosted: 07 Sep 2013, 07:21
by highonthehog
Thanks gaz going to do an order this weekend, need some to seal the door on the smoker, end something for the firebox door